Compact Cars
Adding a nitrous spray bar to an intercooler is a proven way to lower the intake air temps and consequently give a more dense charge to the combustion chamber for more horsepower. We’ve been seeing more and more intercooler spray bars popping up on both performance and show-n-go cars.
Sketch out a few ideas on paper, or some people like to put tracing paper over an actual photograph. Somehow come up with a plan for your paint scheme. We opted to “visually lengthen” the car by using a base scallop to connect both sides. This pattern flows to the side chrome, and extending this outline from the front to the rear gives the longer appearance. The stock Mercury body is thick. By putting the scallops below the trim line on the car, your eye is automatically drawn downward, giving the Mercury a lower, thinner appearance.
The Honda Prelude may not be as popular as the Civic or the Integra, but it does have a rather large tuner following. One of the reasons that the Prelude isn’t as modified as often as other Hondas is that the model’s initial purchase price is considerably more than a Civic Si or Integra GS-R, since the Prelude was better appointed with options and a more powerful engine.
Have you ever looked at another enthusiast’s ride and noticed something unique, yet very clever, that made the vehicle stand out or perform better and thought, “Why didn’t I think of that?” Well, we’ve done some of the homework, legwork and research to provide you with a similar advantage. We scoured the tuning shops and interrogated the pros to find out what tips they have done that our readers could apply to their own vehicles.
We learned that Underground Motorsports in Little Rock, Arkansas, was going to build one fast daily driver, so we thought we’d take a peek and drop some knowledge for you. We were looking for any tech procedures that may illustrate for readers how a car of this sort is built from scratch.
The new E46 BMW M3 comes equipped with some serious OE HID headlights, but what if you’re still not happy? You want something different; you want to add some spice to your headlight setup. Well, this story is just for you.
When a B16A-equipped CRX EF came into the Rage Performance shop for a Skunk2 intake manifold install, the crew dove into the job with a fury. With cameras at hand to document the swap (’88-’91 CRX) for your personal pleasure, the job took no time at all and the owner of this Honda is deliriously happy with the results.
The name Cusco is synonymous with high-end, well-made performance parts. Even though we don’t often see Cusco parts on U.S. soil, when someone has them, people seem to recognize the parts immediately. Cusco specializes in many specific aftermarket automotive parts, but this month we’re going to get a firsthand look at the ins and outs of installing a six-point Cusco cage into a Nissan 240SX.
If you are going to connect anything automatic to your car, especially when dealing with electricity, lead and acid, you owe it to yourself to do a bit more research rather than pulling just any super-discounted, off-the-shelf item and connecting it to something as potentially volatile as a lead-acid battery. But we have, haven’t we?